| TM/EM Number | Current Change | Publication Title (partial) |
| TM 9-2815-221-34&P | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE (INCLUDING REPAI PARTS AND SPECIAL TOOLS LIST) FOR ENGINE, DIESEL, INDUSTRIAL TYPE MODEL DJEAM AND DJBMA (NSN 2815-01-175-7342) AND (2815-00-615-8740) | |
| TM 9-2815-224-34&P | 4 | (INCLUDIN PARTS AND SPECIAL TOOLS LIST) FOR ENGINE, DIESEL: 8-CYLINDER, T CHARGED, DETROIT DIESEL ALLISON MODEL 8V92TA (NSN 2815-01-132-1 |
| TM 9-2815-225-34&P | RPSTL FOR ENGINE, DIESEL: 6 CYLINDER IN-LINE, TURBOCHARGED, CUMMINS MODEL NTC-400 M915-M920/BIG CAM I (NSN 2815-01-082-8126), M915A1/BIG CAM III (2815-01-142-2745) | |
| TM 9-2815-226-34-1 | 1 | ENGIN DIESEL; 6 CYLINDER INLINE, TURBOCHARGED (CUMMINS MODEL NTC-400- (NSN 2815-01-156-6210) |
| TM 9-2815-226-34-2 | 1 | ENGIN DIESEL; 6 CYLINDER INLINE, TURBOCHARGED (CUMMINS MODEL NTC-400- (NSN 2815-01-156-6210) |
| TM 9-2815-226-34P | 1 | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR ENGINE, DIESEL, 6 CYLINDER, INLINE, TURBOCHARGED MODEL NTC-400 BC2 (NSN 2815-01-156-6210) |
| TM 9-2815-237-34 | 2 | ENGINE, DIES 8 CYLINDER, NATURALLY ASPIRATED, FUEL-INJECTED, WATER COOLED, D MODEL 6.2 LITER (NSN 2815-01-231-3672) (2815-01-315-7940) (1990 DDA MODEL 6-5 LITER (2815-01-410-9710) {TM-2815-34/3A; TO 38V1- (THIS ITEM IS INCLUDED ON EM 0030,EM 0034 & EM 0097) |
| TM 9-2815-237-34P | ENGINE, DIESEL: 8 CYLINDER, NATURALLY ASPIRATED, FUEL-INJECTED, WATER COOLED; DDA MODEL 6.2 LITER (NSN 2815-01-231-3672) AND (2815-01-314-7940) DDA MODEL 6.5 LIT (2815-01-410-9710) {TO 38V1-6-4; TM 2815-34P/4B} (THIS ITEM IS INCLUDED ON EM 0030,EM 0034 & EM 0097) | |
| TM 9-2815-242-34 | ENGIN DIESEL: LIQUID COOLED V-TYPE, EIGHT CYLINDER TURBOCHARGED CUMMI VTA-903T-600 WITH ENGINE CONTAINER ASSEMBLY (NSN 2815-01-290-12903) | |
| TM 9-2815-242-34P | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS) F ENGINE, DIESEL, LIQUID COOLED, V-TYPE, EIGHT CYLINDER, TURBOCHA CUMMINS MODEL VTA903-T600 WITH CONTAINER (NSN 2815-01-290-1290) AND WHITE SMOKE REDUCED (2815-01-423-0929) (THIS ITEM INCLUDED ON EM 0043) | |
| TM 9-2815-243-40&P | GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR AUXILIARY POWER UNIT ENGINE ASSEMBLY (NSN 2815-01-292-2990) | |
| TM 9-2815-250-24&P | 1 | UNIT, DIRCT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR ENGINE ASSEMBLY, DIESEL HATZ 2 G 40 (NSN 2815-01-446-3500) (EIC: AKA) |
| TM 9-2815-252-24 | 3 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS FOR DIESEL ENGINE MODEL DN2M 2 CYLINDER 0.9 LITER (NSN 2815-01-350-2205) {TO 38G1-92-2} |
| TM 9-2815-252-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR TOOLS AND SPECIAL TOOLS LIST FOR DIESEL ENGINE MODEL DN2M-1 TWO-CYLINDER, FOUR CYCLE, FUEL INJECTED (NSN 2815-01-350-2205) {TO 38G1-92-4} | |
| TM 9-2815-253-24 | 3 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS FOR DIESEL ENGINE MODEL DN4M 4 CYLINDER 1.2 LITER (NSN 2815-01-350-2206) {TO 38G1-93-2; TM 2815-24/3} |
| TM 9-2815-253-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DIESEL ENGINE (NSN 2815-01-350-2206) MODEL DN4M-1 FOUR-CYLINDER, FOUR CYCLE, FUEL INJECTED {TO 38G1-93-4; TM 2815-24P/1} | |
| TM 9-2815-254-24 | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS FOR DIESEL ENGINE MODEL C-240PW-28 4 CYLINDER 2.4 LITER (NSN 2815-01-350-2207) {TO 38G1-94-2} |
| TM 9-2815-254-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DIESEL ENGINE (NSN 2815-01-350-2207) (MODEL C-240PW-28) FOUR-CYCLINDER, FOUR CYCLE, FUEL INJECTED {TO 38G1-94-4} | |
| TM 9-2815-255-24 | 3 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS FOR DIESEL ENGINE MODEL 4039T 4 CYLINDER 3.9 LITER (NSN 2815-01-350-2208) {TO 38G1-95-2; TM 2815-24/4} |
| TM 9-2815-255-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DIESEL ENGINE (NSN 2815-01-350-2208) MODEL 4039TF002, FOUR-CYLINDER, FOUR CYCLE, TURBOCHARGED {TO 38G1-95-4; TM 2815-24P/2} | |
| TM 9-2815-256-24 | 3 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE INSTRUCTIONS FOR DIESEL ENGINE MODEL 6059T 6 CYLINDER 5.9 LITER (NSN 2815-01-350-2209) {TO 38G1-96-2; TM 2815-24/5} |
| TM 9-2815-256-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DIESEL ENGINE (NSN 2815-01-350-2209) (MODEL 6059TF002) SIX CYLINDER, FOUR CYCLE TURBOCHARGED {TO 38G1-96-4; TM 2815-24P/3} | |
| TM 9-2815-257-24 | UNIT DIESEL ENGINE ASSEMBLY MODEL L70AE-DEGFR (NSN 2815-01-465-5993) (EIC: N/A) | |
| TM 9-2815-257-24P | DIESEL ENGINE MODEL L70A3-DEGFR (NSN 2815-01-465-5993) (EIC:N/A) | |
| TM 9-2815-259-24 | TECHNICAL MANUAL UNIT DIESEL ENGINE MODEL 4045TF151 4 CYLINDER 4.5 LITER (NSN 2815-01-462-2289) (EIC: N/A) | |
| TM 9-2815-259-24P | TECHINCAL MANUAL UNIT DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST DIESEL ENGINE MODEL 4045TF151 4 CYLINER, 4.5 LITER (NSN 2815-01-462-2289) (EIC:N/A) | |
| TM 9-2815-260-24 | TECHNCIAL MANUAL AND GENERAL SUPPORT MAINTENANCE MANUAL DIESEL ENGINE MODEL 6068TF151 (NSN 2815-01-462-3596) (EIC: N/A) | |
| TM 9-2815-260-24P | TECHNICAL MANUAL UNIT DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST DIESEL ENGINE MODEL 6068TF151 6 CYLINDER, 6.8 LITER (NSN 2815-01-462-3596) (EIC: N/A) | |
| TM 9-2815-538-24&P | FIELD AND SUSTAINMENT MAINTENANCE MANUAL INCLUDING REAPIR PARTS AND SPECIAL TOOLS LIST FOR YANMAR DIESEL ENGINE 4TNV84T-DFM 4 CYLINDER 2.0 LITER (NSN 2815-01-538-4237) (EIC: N/A) | |
| TM 9-2835-255-34 | 6 | DIRECT SUPPORT AND SUPPORT MAINTENANCE MANUAL FOR TURBINE ENGINE, FIELD SERVICE, MODEL AGT1500 (M1/1PM1) (P/N 12287428), AND TURBINE ENGINE, FIELD SERVICE MODEL AGT 1500 (M1A1) (P/N 12324029), AND CONTAINER (NSN 8145-01-112-6574), TURBINE ENGINE WITH CONTAINER MODEL AGT1500 (M1/1PM1/M1A1) (P/N 5705196 (2835-01-216-8639), AND TURBINE ENGINE WITH CONTAINER MODEL AGT1500 WITH BATTLE FIELD OVERRIDE AND PULSE JET (M1A1/M1A2) (P/N 57K2919) (2835-01-408-7048) (THIS ITEM IS INCLUDED ON |
| TM 9-2835-255-34P | 3 | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS) F TURBINE ENGINE, FIELD SERVICE, MODEL AGT 1500 (M1/IPM1) (PART N 12287428) AND TURBINE ENGINE, FIELD SERVICE MODEL AGT 1500 (M1A (PART NO. 12324029) AND TURBINE ENGINE, FIELD SERVICE MODEL AGT 1500 (M1A1/M1A2) (P/N 12347472) AND CONTAINER (NSN 8145-01-112- |
| TM 9-2910-212-34&P | PUMP, FUEL METERING AND DISTRIBUTING (AMERICAN B MODEL PSB-12BT) (NSN 2910-01-073-0124) | |
| TM 9-2910-213-34&P | INCLUDING REPAIR PARTS FOR PUMP, FUEL, ENGINE ASSEMBLY (NSN 2910-00-678-4673) (THIS ITEM IS INCLUDED ON EM 0036, EM 0044 & EM 0063) | |
| TM 9-2910-226-34 | 2 | (INCLUDIN REPAIR PARTS & SPECIAL TOOLS LIST) FOR PUMP, FUEL, METERING AND DISTRIBUTING ASSEMBLY (NSN 2910-00-178-1185, 2910-00-759-5410, 2910-00-908-6320, 2910-00-968-6317 AND 2910-00-116-8241) (THIS ITEM IS INCLUDED ON EM 0037, EM 0039, EM 0072, AND EM 008 |
| TM 9-2920-224-34&P | INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR GENERATOR ASSEMBLY, ENG (300 AMP) 8717421 (NSN 2920-00-795-6627); 10889713 (2920-00-830-6660) AND 11642898 (2920-00-169-5715) (THIS ITEM IS INCLUDED ON EM 0036, EM 0044, EM 0063, EM 0117, & | |
| TM 9-2920-225-34 | MAINTENANCE DIRECT AND GENERAL SUPPORT LEVEL GENERATOR ASSEMBLY (PRESTOLITE MODEL AMA-5102UT) (LEECE-NEVILLE MODELS 3002AC, 300 3002AE) (NSN 2920-00-909-2483), (MODELS 5504AA, 5504AB) (2920-00-475-1446), (MODEL 2184AC) (2920-00-782-1955) AND (MODE 5300GP) (2920-00-818-8635) {TO 38X6-7-22} (THIS ITEM IS INCLUDED ON EM 0035, EM 0037, EM 0039, EM 0040, E EM 0078, EM 0088, EM 0120 & EM 0133) | |
| TM 9-2920-225-34P | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIA GENERATOR, ENGINE ACCESSORY (AC) (PRESTOLITE MODEL AMA-5102UT) (FSN 2920-909-2483), (LEECE-NEVILLE MODELS 3002AC AND 3002AD) (2920-909-2483), (MODELS 5504AA AND 5504AB) (2920-475-1446), (M 2184AC) (2920-782-1955) AND (MODEL 5300GP) (2920-818-8635) (THIS ITEM IS INCLUDED ON EM 0035, EM 0037, EM 0039, EM 0040, E EM 0078, EM 0088, EM 0120 & EM 0133) | |
| TM 9-2920-232-34&P | INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR STARTER, ELECTRICAL, ASSEMBLY (DELCO-REMY-GMC MODEL 1109972) (NSN 2920-00-973-1557) AND (MODEL NO. 1990272) (2920-01-139-3722) {TO 38X14-2-32} (THIS ITEM IS INCLUDED ON EM 0036, EM 0038, EM 0044 & EM 0063) | |
| TM 9-2920-236-35 | 2 | DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE MANUAL ( DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR P LIST) FOR STARTER, ENGINE, ELECTRICAL (AUTO-LITE MODEL MBD-4044 (FSN 2920-763-2346) |
| TM 9-2920-242-35 | 5 | DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS) FOR STARTER, ENGINE, ELECTRICAL, ASSEM (NSN 2920-00-226-6545) (DELCO-REMY MODEL 1113943) (MILITARY PAR 10911018-1); STARTER, ENGINE ELECTRICAL ASSEMBLY (2920-00-911-5 (DELCO-REMY MODEL 1113904) (MILITARY PART NUMBER 10911018) STAR ENGINE ELECTRICAL, ASSEMBLY (2920-00-912-9510) (DELCO-REMY MODE 1113944) (THIS ITEM IS INCLUDED ON EM 0037, EM 0039, EM 0072, AND EM 008 |
| TM 9-2920-243-34 | 1 | (INCLUDIN REPAIR PARTS AND SPECIAL TOOLS LIST) FOR STARTER, ENGINE, ELECT (LEECE-NEVILLE MODEL M0017072MB) (NSN 2920-00-267-9987) (THIS ITEM IS INCLUDED ON EM 0037, EM 0039, EM 0072, AND EM 008 |
| TM 9-2920-252-34&P | INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR 650 AMPERE GENERATOR ASSEMBLY (BENDIX CORP., MODEL 30B95-3-B) (NSN 2920-00-441-8137) VOLTAGE REGULATOR ASSEMBLY (BENDIX CORP., MODEL 24B30-3-B) AND (ELECTRO-TECH MODEL 1300) (6110-00-467-4000) | |
| TM 9-2920-257-30&P | 1 | DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND S TOOLS) FOR GENERATOR, ALTERNATING CURRENT, 200 AMPERES (NSN 2920-01-147-1575) (THIS ITEM IS INCLUDED ON EM 0040, EM 0078, & EM 0076) |
| TM 9-2920-258-30&P | DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND S TOOLS) FOR ALTERNATOR, 180 AMPERES MODEL 5520AB (NSN 2920-01-28 P/N 12268305 | |
| TM 9-2990-205-34&P | INCLUDING PARTS AND SPECIAL TOOLS LIST FOR TURBOSUPERCHARGER (SCHWITZER M 5HDR) (NSN 2950-00-397-3384) (11668377-1) AND (2950-01-167-1700 (187727) | |
| TM 9-2990-206-34&P | 2 | (INCLUDIN PARTS AND SPECIAL TOOLS LIST) FOR TURBOSUPERCHARGER (AIRESEARCH T18C01) (NSN 2950-01-048-8870) (11669107-1) AND (2950-01-167-16 (466392-1) (THIS ITEM IS INCLUDED ON EM 0036 & EM 0044) |
| TM 9-300-3 | INSPECTION, CARE AND PRESERVATION OF AIR DEFENSE ARTILLERY TOWE WEAPON MATERIEL (LESS GUIDED MISSILE) DURING STORAGE | |
| TM 9-3071-1 | 1 | FIELD MAINTENANCE FOR 60-MM MORTARS, M2 AND M19; 60-MM MORTAR M M2; 60-MM MORTAR BASEPLATE, M1; 81-MM MORTARS, M1 AND M29 AND 8 MORTAR AND MOUNTS, M4, M23A1, M23A2 AND M23A3 |
| TM 9-3305 | PRINCIPLES OF ARTILLERY WEAPONS | |
| TM 9-3405-205-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LISTS FOR SAW, BAND, CUTTING, (DON G. JENNESS CO., INC. MODEL S87) (NSN 3405-00-294- (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-206-14&P | OPERATOR, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, BAND, M CUTTING, 14-IN. (NSN 3405-00-409-0063) | |
| TM 9-3405-209-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, POWER H (NSN 3405-00-729-3917) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-210-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, BAND, METAL CUTTING MODEL 2614-1 (DO ALL CO.) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-213-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, POWER H (KASTO-RACINE INC., MODEL 1010) (NSN 3405-00-812-1593) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-214-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, POWER, (KELLER MFG, MODEL 3) HEAVY DUTY (NSN 3405-00-729-3917) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-215-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, BAND, M CUTTING (DOALL CO., MODEL 3613-20) (NSN 3405-00-351-9704) | |
| TM 9-3405-216-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SAW, BAND, (W. F. WELLS & SONS, INC. MODEL L-9) (NSN 3405-00-473-6430) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3405-217-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR POWER HACK S (KELLER MFG., MODEL 5 HY-DUTY SA) (NSN 3405-00-812-1593) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3413-222-12 | 1 | ORGANIZATIONAL MAINTENANCE MANUAL: DRILLING MACHINE, UPRIGHT, F MOUNTED, 2-INCH DRILLING CAPACITY IN CAST IRON, 1 SPINDLE, NO. TAPER SOCKET, 7 1/2-INCH SPINDLE TRAVEL, 11-INCHES FROM COLUMN OF SPINDLE, 8 SPEEDS, 65 TO 1350, 3 HP, 220 V, 60 CYCLE, 3 PHAS (BUFFALO FORGE CO., MODEL 22-RC) (FSN 3413-517-1061) |
| TM 9-3413-223-15P | 1 | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, GENERAL SUPPORT, AN MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR DRILLING MA UPRIGHT, BENCH MTD, 1/4-INCH CAPACITY, 2 1/4 SPINDLE TRAVEL, 1/ 115 V, 60 HZ, SINGLE PHASE (HIGH SPEED HAMMER CO., MODEL R-53) (HIGH SPEED HAMMER CO. MODEL R-53) (3413-221-8714) |
| TM 9-3415-226-10 | 1 | OPERATORS MANUAL: GRINDING MACHINE, DRILL (BLACK DIAMOND SAW AND MACHINE WORKS INC., MODEL DD2) (FSN 3415-517-10 |
| TM 9-3415-227-10 | 1 | OPERATORS MANUAL: BLACK DIAMOND PRECISION DRILL GRINDERS |
| TM 9-3415-235-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR GRINDING MAC (FOLEY MFG. CO., MODEL 37401) (NSN 3415-01-030-1534) | |
| TM 9-3416-221-10 | 1 | OPERATORS MANUAL FOR LATHE, ENGINE FLOOR MTD, SLIDING BED GAP; 28-INCH RATED SWING, 50-INCH OPEN AND 30-INCH CLOSED BETWEEN CE 5 HP, 208/440 V, 3 PHASE, 60 HZ (LEBLOND MACHINE TOOL CO., MODE 17/28 INCH, REGAL) (FSN 3416-725-3508) AND LATHE, ENGINE, FLOOR PLAIN BED GAP, 17 TO 26-INCH RATED SWING, 30-INCHES BETWEEN CEN 3 HP, 208/416 V, 3 PHASE 50/60 HZ (MODEL 17 INCH, REGAL) (3416- |
| TM 9-3416-223-12 | 1 | ORGANIZATIONAL MAINTENANCE MANUAL FOR LATHE, ENGINE, BENCH MTD, BED TYPE, 10-INCH SWING, NO. 2 MORSE TAPER CENTER, 1 3/8 SPINDL 110 V, 60 HZ, SINGLE PHASE; 3/4 HP W/ARMY DWG NO. 7550151 BENCH (SHELDON MACHINE CO., INC. MODEL XL) (FSN 3416-517-0955) |
| TM 9-3416-225-12 | 2 | ORGANIZATIONAL MAINTENANCE MANUAL FOR LATHE, ENGINE, BENCH MTD, BED TYPE; 10-INCH SWING, NO. 2 MORSE TAPER CENTER, 1 3/8 SPINDL 110 V, 60 HZ, SINGLE PHASE, 3/4 HP W/ARMY DWG NO. 7550151 BENCH (STANDARD-MODERN TOOL SERIES 2,000, MODEL 11 INCH) (FSN 3416-51 |
| TM 9-3416-235-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR LATHE, ENGIN 9-INCH SWING (SOUTH BEND LATHE MODEL CL-670Z) (NSN 3416-00-235- | |
| TM 9-3416-240-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR LATHE, ENGIN (MCILVANIE MACHINE WORKS MODEL B-40) (NSN 3416-00-725-3508) | |
| TM 9-3417-210-10 | 1 | OPERATORS MANUAL: MILLING MACHINE, RAM TYPE, SWIVEL HEAD PLAIN POWER FEED, 1 1/2 HP, 110 V, 60 CYCLE, SINGLE PHASE (VAN NORMAN MODELS IR-3-22 AND IRQ-3-22) (FSN 3417-624-4254) (THIS ITEM INCLUDED ON EM 0138) |
| TM 9-3417-211-14&P | OPERATORS ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR MILLING MACH (ROCKWELL INTERNATIONAL CORP., MODELS 21-122 W/49-697 AND 52-02 (NSN 3417-00-494-9573) | |
| TM 9-3417-213-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR MILLING MACH VERTICAL MODEL 747VS (WELLS-INDEX CORP.) (NSN 3417-00-764-7993) | |
| TM 9-3417-215-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR MILLING MACH (BURKE DIVISION POWERMATIC/HOUDAILLIE, INC., MODEL NO. 4) (NSN 3417-00-357-1948) | |
| TM 9-3418-200-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHAPER, META CUTTING, HORIZONTAL (SOUTH BEND MODEL CS100) (NSN 3418-00-223-0 | |
| TM 9-3418-201-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHAPER, META CUTTING, HORIZONTAL (ROCKFORD MACHINE TOOL CO.) (NSN 3418-00-80 | |
| TM 9-3418-204-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHAPER (MITT MERRILL, INC.) (NSN 3418-00-412-4506) | |
| TM 9-3419-224-10 | 1 | OPERATORS MANUAL FOR SAW BAND METAL CUTTING (BOICE-CRANE CO. MODEL 2325) (FSN 3419-222-1330) |
| TM 9-3419-225-10 | 1 | OPERATORS MANUAL: HONING MACHINE, HORIZONTAL, BENCH MTG; 0.480 TO 3.000 INCH WORKING CAPACITY RANGE, 1 SPINDLE, 1/3 HP, AC, 115 V, 60 HZ, SINGLE PHASE (AMMCO TOOLS INC., MODEL 2500) (FSN 3419-812-1591) |
| TM 9-3419-227-10 | 2 | OPERATORS MANUAL: SAW, BAND, METAL CUTTING, FLOOR MOUNTING, 16 THROAT DEPTH SAW BLADE OR FILE BAND; 24X24 TABLE ANGLE ADJUSTIN 60 CYCLE, 3 PHASE (DO ALL CO., MODEL 1612-OM) (NSN 3419-00-294- (THIS ITEM INCLUDED ON EM 0138) |
| TM 9-3419-228-10 | 1 | OPERATORS MANUAL: SAW, BAND, METAL CUTTING, FLOOR MOUNTING, 26 THROAT DEPTH, 26X26 WORK TABLE, TILT TYPE TABLE, 220 V, 60 HZ, W/INTEGRAL BUTT WELDER (DO ALL CO., MODEL 2612-1M) (FSN 3419-54 (THIS ITEM INCLUDED ON EM 0138) |
| TM 9-3419-231-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR HONING MACHI GENERAL AUTOMOTIVE (DESERT LABORATORIES, INC.) (NSN 3419-00-812 | |
| TM 9-3419-234-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR THREADING MA PIPE AND BOLT, MODEL C (NSN 3419-00-220-9101) | |
| TM 9-3431-254-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR WELDING MACH MODEL GCC-300W (NSN 3431-01-032-6289) | |
| TM 9-3431-258-14&P | 1 | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TORCH OUTFIT WELDING, GAS MODEL: 137 (WESTINGHOUSE ELECTRIC CORP., MODEL 137 (NSN 3431-00-691-1415) |
| TM 9-3431-265-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR WELDING SHOP TRAILER MOUNTED MODEL 491996 (NSN 3431-01-090-1231) | |
| TM 9-3431-266-14&P-1 | 1 | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIS FOR WELDING MACHINE MODEL DCC-353-P (NSN 3431-01-079-8439) |
| TM 9-3431-266-14&P-2 | 1 | OPERATORS ORGANIZATIONAL, INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIS FOR WELDING MACHINE MODEL DCC-353-P (NSN 3431-01-079-8439) |
| TM 9-3431-272-13&P | OPERATORS, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR WELDING SHOP, TRAILER MOUNTED MODEL 11838792 (NSN 3431-01-341-6232) | |
| TM 9-3441-100-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR BRAKE MACHIN MODEL 1014 (NSN 3441-00-265-7137) (DON G JENNESS CO., INCL.) (THIS ITEM INCLUDED ON EM 0138) | |
| TM 9-3441-104-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR BRAKE MACHIN MODEL HB97-18 (TENNSMITH) (NSN 3441-00-190-3295) | |
| TM 9-3444-203-10 | 1 | OPERATORS MANUAL FOR PRESS, ARBOR, HAND OPERATED (ACCO EQUIPME DIVISION OF AMERICA CHAIN AND CABLE CO., MODELS P-994 AND P-995 (FSN 3444-449-7295) |
| TM 9-3445-102-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHEARING MAC METAL-SQUARING, MODEL NOS. 132, 137, 142 AND 152 (PECK, STOW, A CO., INC) (NSN 3445-00-239-0706) | |
| TM 9-3445-106-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHEARING MAC (ROPER WHITNEY INC., MODEL 10-U-8) (NSN 3445-00-277-9100) | |
| TM 9-3445-465-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR SHEARING MAC (LONGE SHIPLEY CO.) (NSN 3445-00-277-9100) | |
| TM 9-3465-200-10 | 1 | OPERATORS MANUAL: FIXTURE, LATHE, METAL CUTTING FOR 2-INCH DIA ROUND OR 2-INCH SQUARE STOCK, 360 DEGREE INDEX RING, 12 1/2 HIG WIDE, 3 7/8 VERTICAL TRAVEL (NUMERIC PRODUCTS CO., MODEL 312) (FSN 3465-022-8817) |
| TM 9-3465-201-10 | 1 | OPERATORS MANUAL: FIXTURE, LATHE, METAL CUTTING FOR 2 INCH DIAMETER ROUND OR 2 INCH SQUARE STOCK, 360 DEGREE INDEX RING, 12-1/2 HIGH, 5 WIDE, 3-7/8 VERTICAL TRAVEL (DUMORE COMPANY MODEL 8349) (NSN 3465-00-022-8817) |
| TM 9-3830-206-34P | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS LIS (INCLUDING DEPOT MAINTENANCE ALLOWANCES) FOR WINCH ASSEMBLY (FSN 2590-753-8687) (2520-040-2112) HG-W2868D AND (2590-402-520 W/CABLE LEVEL WINDER ASSEMBLY | |
| TM 9-3990-206-10 | TECHNICAL MANUAL OPERATOR'S MANUAL FOR PALLETIZED LOAD SYSTEM (PLS) FLATRACK M1077/M1077A1 NSN 3990-01-307-7676 ISO COMPATIBLE PALLETIZED FLATRACK (IPF) M1 (NSN 3990-01-406-1340) | |
| TM 9-3990-257-13&P | TECHNCIAL MANUAL OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) BITUMINOUS DISTRIBUTOR MODULE MODEL M4 (NSN 3990-01-444-6174) (EIC: BDP) | |
| TM 9-3990-258-13&P-1 | OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL AND REPAIR PARTS AND SPEICAL TOOLS LIST (RPSTL) CONCRETE MOBILE MIXER MODULE MODEL M5 (NSN 3990-01-444-5196) (EIC:BND) | |
| TM 9-3990-258-13&P-2 | OPERATOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL AND REPAIR PARTS AND SPEICAL TOOLS LIST (RPSTL) CONCRETE MOBILE MIXER MODULE MODEL M5 (NSN 3990-01-444-5196) (EIC:BND) | |
| TM 9-3990-259-13&P | TECHNCIAL MANUAL OPERTOR, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL AND REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL) DUMP BODY MODULE MODEL M6 (NSN 3990-01-443-8024) (EIC: BDQ) | |
| TM 9-3990-260-14&P | 1 | CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 (NSN 3990-01-442-2751) AND M3A1 (3990-01-450-5671) |
| TM 9-4020-200-10 | OPERATORS MANUAL FOR ALLIED KINETIC ENERGY RECOVERY ROPE (AKER (NSN 4020-01-211-8382) | |
| TM 9-4110-241-13 | 2 | REFRIGERATOR: PANEL TYPE, PREFABRICATED ASSEMBLIES 600 CU. FT. MODEL TKR-600C (NSN 4110-01-264-2101) 600 CU. FT. MODEL AA600PF (4110-01-166-3579) 1200 CU. FT. MODEL AA1200PFA (4100-01-167-5320) 4000 CU. FT. MODEL AA4000PF (4110-01-166-3580) 4000 CU. FT. MODEL TKR-4000C (4110-01-315-9329) |
| TM 9-4110-241-23P | UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TO LIST FOR REFRIGERATOR, PANEL TYPE PREFABRICATED ASSEMBLIES 600 MODEL MDS1600N (NSN 4110-01-361-3891) 600 CU. FT. MODEL TKR-600 (4110-01-264-2101) 600 CU. FT. MODEL AA600PF (4110-01-166-3579) 1200 CU. FT. MODEL AA1200PFA (4110-01-167-5320) 4000 CU. FT. MO AA4000PF (4110-01-166-3580) 4000 CU. FT. MODEL TKR-4000C (4110-01-315-9329) | |
| TM 9-4110-246-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR REFRIGERATOR, PREFABRICATED, (1200 CUBIC FOOT) MODEL TKR 1200C (NSN 4110-01-239-9200) AND MODEL REF 1200 (4110-01-31 {TO 40R7-5-10-1} |
| TM 9-4110-246-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR AND SPECIAL TOOLS LIST FOR REFRIGERATOR, PREFABRICATED (1200 CU FOOT) (NSN 4110-01-239-9200) {TO 40R7-5-10-4} | |
| TM 9-4110-254-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR REFRIGERATION UNIT, MECANICAL 5K BTU, ELECTRIC MODEL F5000RE (NSN 4110-01-389-9180) |
| TM 9-4110-254-24P | REFRIGERATION UNIT, MECHANICAL, 5K BTU, ELECTRIC, MODEL F5000RE | |
| TM 9-4110-255-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR REPRIGERATION UNIT, MECHANICAL, 5K BTU, DIESEL MODEL F5000RD (NSN 4110-01-389-9181) |
| TM 9-4110-255-24P | REFRIGERATION UNIT, MECHANICAL, 5K BTU, DIESEL MODEL F5000RD (NSN 4110-01-389-9181) | |
| TM 9-4110-256-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR REFRIGERATION UNIT, MECHANICAL, 10K BTU, ELECTRIC MO F10000RE (NSN 4110-01-389-9182) |
| TM 9-4110-256-24P | 1 | REFRIGERATION UNIT, MECHANICAL, 10K BTU, ELECTRIC MODEL F10000RE (NSN 4110-01-389-9182) |
| TM 9-4110-257-14 | 2 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR REFRIGERATION UNIT, MECHANICAL, 10K BTU, DIESEL MODE F10000RD (NSN 4110-01-389-9183) |
| TM 9-4110-257-24P | REFRIGERATION UNIT, MECHANICAL, 10K BTU, DIESEL MODEL F10000RD NSN 4110-01-389-9183 | |
| TM 9-4110-258-13 | 1 | OPERATORS, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL FOR REFRIGERATION UNIT, MECHANICAL, 9K BTU, ELECTRIC MODEL F9000RE (NSN 4110-01-394-6473) |
| TM 9-4110-258-23P | REFRIGERATION UNIT, MECHANICAL 9K BTU, ELECTRIC MODEL F9000RE (NSN 4110-01-394-6473) | |
| TM 9-4120-357-14 | OPERATORS, UNIT, AIR CONDITIONER, COMPACT, VERTICAL 208-VOLT, 3 PHASE, 60,000 BTU/HR 50/60 HERTZ KECO MODEL F60T-2 (NSN 4120-00-935-5416) (EIC: VTN) HARVEY W. HOTTEL, INC. MODEL CV 60-6/6-08 (4120-00-935-5416) KECO MODEL F60T-2A (4120-01-181-6060) UNIFAB INDUSTRIES, MODEL CV-60-5/6-08 (4120-01-213-5980) | |
| TM 9-4120-360-14 | OPERATOR, UNIT, AIR CONDITIONER, VERTICAL COMPACT TYPE I, VERTICAL, SIZE C, 18,000 BTU/HR, CLASS 1,208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F18T-2 (NSN 4120-00-168-1781) (THIS ITEM IS INCLUDED ON EM 0089 & EM 0148) | |
| TM 9-4120-360-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL, COMPACT, TYPE 1, VERTICAL SIZE C, 18,000 BTU/HR., 208 VOLT, 3 PHASE, 50/60 HERTZ, KECO MODEL F18T-2 (NSN 4120-00-168-1781) | |
| TM 9-4120-367-14 | 1 | OPERATORS, UNIT, AIR CONDITIONER, HORIZONTAL, COMPACT, 18,000 BTU/HR COOLING MODEL: F18H, POWER: 230V, SINGLE PHASE, 50/60 HZ (NSN 4120-00-411-3729) (EIC: VSJ) MODEL: F18H-3, POWER: 208V, 3 PHASE, 50/60 HZ (4120-01-076-1753 (EIC: VUA) MODEL: K1F-18H-4, POWER: 208V, 3 PHASE, 400 HZ (4120-01-177-5990) (EIC: VWU) MODEL: F18H-3A, POWER: 208V, 3 PHASE, 50/60 HZ (4120-01-122-0626) (EIC: VUO) MODEL: F18H-4A, POWER: 208V, 3 PHASE, 400 HZ (4120-01-122-0627) (EIC: VUP) MODEL: MHP-20-4-08, POWER: 208V, 3 PHASE, 400 HZ |
| TM 9-4120-367-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PART AND SPECIAL TOOLS LIST) FOR AIR CONDITIONER, HORIZONTAL, COMPAC 18,000 BTU/HR230-VOLT, 1 PHASE, 50/60 HERTZ, KECO MODEL F18H, (NSN 4120-00-411-3729) 208-VOLT, 3 PHASE, 50/60 HERTZ, KECO MOD F18H-3 (4120-01-076-1753) 208-VOLT, 3 PHASE, 400 HERTZ, KECO MO F18H-4 (4120-00-411-3731) 208-VOLT, 3 PHASE, 50/60 HERTZ, KECO F18H-3A (4120-01-122-0626) 208-VOLT, 3 PHASE, 400 HERTZ, KECO M F18 | |
| TM 9-4120-370-14 | 1 | OPERATORS UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT 36,000 BTU COOLING, 28,600 BTU/HR HEATING 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2S (NSN 4120-01-110-2034) 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T2-2SA (4120-01-222-9310) 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2S (4120-01-222-6438 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2SA (4120-01-332-7640) 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2SB (4120-01-347-6849) {TO 35E9-229 |
| TM 9-4120-370-14-HR | HAND RECEIPT COVERING THE END ITEM/COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST (AAL) FOR AIR CONDITIONER, VERTICAL, COMPACT 36,000 BTU COOLING, 28,600 BTU/HR HEATING 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2S (NSN 4120-01-110-2034) 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2SA (4120-01-222-9310) 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2S (4120-01-222-6438) 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2SA (4120-01-332-7640) 208 VOLT, 3 PHASE, 4 | |
| TM 9-4120-370-24P | UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL COMPACT, 36,000 BTU/HR COOLING 28,600 BTU/HR HEATING 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2S, (NSN 4120-01-110-2034) 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2SA, (4120-01-222-9310) 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2S, (4120-01-222-6438) 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F36T-2SA, (4120-01-332-7640) 208 VOLT, 3 PHASE, 400 HERTZ KECO MODEL F36T4-2SB (4120 | |
| TM 9-4120-371-10-HR | HAND RECEIPT COVERING CONTENTS OF COMPONENTS OF END ITEM (COEI), BASIC ISSUE ITEMS (BII), AND ADDITIONAL AUTHORIZATION LIST ITEMS (AAL) FOR AIR CONDITIONER, VERTICAL COMPACT, 18,000 BTU/HR 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MODEL F18T-2S (NSN 4120-01-114-2471) KECO MODEL F18T-2SA (4120-01-329-1515) A.R.E. MODEL CVP-20-5/6-08 (4120-01-216-1151) (THIS ITEM IS INCLUDED ON EM 0089 & EM 0148) | |
| TM 9-4120-371-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT, 18,000 BTU/HR, 208 VOLT, 3 PHASE, 50/60 HERTZ, KECO MODEL F18T-2S (NSN 4120-01-114-2471), KECO MODEL F18T-2SA (4120-01-329-1515) A.R.E. MODEL CVP-20-5/6-08 (4120-01-216-1151 (THIS ITEM IS INCLUDED ON EM 0089 & EM 0148) |
| TM 9-4120-371-24P | 2 | ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANC REPAIR PARTS AND SPECIAL TOOLS) FOR AIR CONDITIONER, VERTICAL, COMPACT, 18,000 BTU/HR, 208 VOLT, 3 PHASE, 50/60 HERTZ KECO MOD F18T-2S (NSN 4120-01-114-2471) AND F18T-2SA (4120-01-329-1515), AND A.R.E. MODEL CVP-20-5/6-08 (4120-01-216-1151) {TO 35E9-242- (THIS ITEM IS INCLUDED ON EM 0089 & EM 0148) |
| TM 9-4120-378-14 | 2 | OPERATORS, UNIT, AIR CONDITIONER, HORIZONTAL, COMPACT 9,000 BTU/HR, 115 VOLT, SINGLE PHASE 50/60 HZ MODEL A9KH-115P (EIC: VWH) (NSN 4120-01-136-2214) MODEL F9000H-1S (4120-01-250-3719) |
| TM 9-4120-378-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, HORIZONTAL, COMPACT, 9,000 BTU/HR, MODEL A9KH-115P, (NSN 4120-01-136-2214) MODEL F90000H-1S, (4120-01-250-3719) (THIS ITEM IS INCLUDED ON EM 0068 & EM 0148) |
| TM 9-4120-380-14 | OPERATORS, UNIT, AIR CONDITIONER, 24,000 BTU ELECTRIC MOTOR DRIVEN 208 V, 3-PHASE, 50/60 HZ, 5 WIRE MODEL - MOAC 226 (NSN 4120-01-158-7465) {EE-000-BA-MMA-010/7053-AC; TO 35E9-136- | |
| TM 9-4120-380-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, 24,000 BTU ELECTRIC MOTOR DRIVEN 208 V, 3-PHASE, 50/60 HZ, 5 WIRE MODEL MOAC 226 (NSN 4120-01-158-7465) | |
| TM 9-4120-381-14 | OPERATORS, UNIT, AIR CONDITIONER, 50,000 BTU ELECTRIC MOTOR DRIVEN 208 V, 3-PHASE, 50/60 HZ 5 WIRE MODEL MOAC 640 (NSN 4120-01-157-0996) {EE-000-CA-MMA-010/7053-AC; TO 35E9-136-31} | |
| TM 9-4120-381-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, 50,000 BTU ELECTRIC MOTOR DRIVEN 208 VOLT, 3-PHASE, 50/60 HZ 5 WIRE MODEL MOAC640 (NSN 4120-01-157-0996) {EE-000-CA-MMA-010/7053-AC; TO 35E9-136-34} |
| TM 9-4120-385-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT 9,000 BTU/HR 115 1-PHASE, 50/60 HERTZ (NSN 4120-01-193-4999) |
| TM 9-4120-385-24P | ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL COMP 9,000 BTU/HR 115 VOLT, 1-PHASE, 50/60 HERTZ (NSN 4120-01-193-49 | |
| TM 9-4120-388-14 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT, 18,000 BTU/HR 208 VOLT, 3 PHASE, 50/60 HERTZ (NSN 4120-01-214-3692) | |
| TM 9-4120-388-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL COMPACT, 18,000 BTU/HR (NSN 4120-01-214-3692) |
| TM 9-4120-389-14 | 3 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR AIR CONDITIONER, HORIZONAL, COMPACT, 36,000 BTU/HR, COOLING, AND 31,200 BTU/HR, HEATING 208 VOLT, 3 PHASE, 50/60 HE (NSN 4120-01-219-8759) MODEL 3864 |
| TM 9-4120-389-24P | 4 | UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PA AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, HORIZONTAL COMPACT, 36,000 BTU/HR, HEATING 208 VOLT, 3 PHASE, 50/60 HERTZ (NSN 4120-01-219-8759) MODEL 3864 |
| TM 9-4120-390-24P | 4 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR AND SPECIAL TOOLS LIST FOR, AIR CONDITIONER, A/E32C-39, HORIZON COMPACT, 54,000 BTU/HR, COOLING, 34,000 BTU/HR, HEATING, 208 VO 3 PHASE, 50/60 HERTZ, MODEL 12090-605, (NSN 4120-01-150-8112) |
| TM 9-4120-395-14&P | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, 24,000 BTUH COOLING, 23,600 BTUH HEATING, WALL MOUNTED, VERTICAL, MODEL AVP24HPA-08 (NSN 4120-01-279-5659) | |
| TM 9-4120-398-14 | 1 | OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE FOR AIR CONDITIONER, 54,000 BTU/HR, 208/230 VOLT, THREE PHASE, HERTZ, MODEL AH-54 (NSN 4120-01-283-4096) (PRINTED W/BASIC INCL C1) |
| TM 9-4120-398-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, 54,000 BTU/R 208/230 VOLT, THREE-PHASE, 50/60 HERTZ MODEL AH-54 (NSN 4120-01-283-4096) |
| TM 9-4120-399-14 | 5 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT 36,000 BTU/HR COOLING 28,600 BTU/HR HEATING 208 VOLT, 3 PHASE 400 HERTZ MODEL 3863 (NSN 4120-01-244-6385) |
| TM 9-4120-399-24P | 1 | UNIT, REP PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL, COM 36,000 BTU/HR COOLING, 28,600 BTU/HR HEATING 208 VOLT 3 PHASE, HERTZ, MODEL 3863 (NSN 4120-01-244-6385) |
| TM 9-4120-400-14 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR AIR CONDITIONER HORIZONTAL COMPACT 9,000 BTU/HR MODE F9000H-1SA, 115 VOLT, SINGLE PHASE, 50/60 HERTZ (NSN 4120-01-32 AND MODEL F9000H-3SA, 208 VOLT, 3 PHASE, 50/60 HERTZ (4120-01-3 | |
| TM 9-4120-400-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, HORIZONTAL, COMPACT, 9,000 BTU/HR, F9000H-1SA 115 VOLT, SINGLE PHASE, 50/60 HERTZ (NSN 4120-01-326-4370) AND F9000H-3SA 208 VOLT, 3 PHASE, 50/60 HERTZ (4120-01-330-6542) | |
| TM 9-4120-401-14 | 2 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR AIR CONDITIONER, HORIZONTAL, COMPACT, MULTIPLE POWER UNIT, 18,000 BTU/HR, KECO MODEL F18H-MPI 208 VOLTS, 3-PHASE, 50/60/400 HERTZ 230 VOLTS, SINGLE-PHASE, 50/60 HERTZ (NSN 4120-01-327-1316) |
| TM 9-4120-401-24P | 1 | AIR CONDITIONER, HORIZONTAL, COMPACT, 18,000 BTU/HR, 208/230 VOLT, SINGLE AND THREE PHASE, 50/60 OR 400 HERTZ MODEL F18H-MPI, NSN 4120-01-327-1316 |
| TM 9-4120-402-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT 18,000 BTU/HR KECO MODEL F18T-MPI 208 VOLT, 3 PHASE, 50/60 OR 400 HERTZ (NSN 4120-01-325-7062) |
| TM 9-4120-402-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL, COMPACT, 18,000 BTU/HR, 208 VOLT, THREE PHASE, 50/60 OR 400 HERTZ MODEL F18T-MPI, (NSN 4120-01-325-7062) |
| TM 9-4120-403-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR AIR CONDITIONER, VERTICAL, COMPACT 6,000 BTU/HR 115 SINGLE PHASE, 50/60 HERTZ MODEL JHAA/C6V1 (NSN 4120-01-327-5447 |
| TM 9-4120-403-24P | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL, COMPACT 6,000 BTU/HR 115 VOLT, SINGLE-PHASE, 50/60 HERTZ MODEL JHAA/C6V1 (NSN 4120-01-327-5447) | |
| TM 9-4120-404-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR AIR CONDITIONER, HORIZONTAL, COMPACT, 36,000 BTU/HR, MULTI-POWER INPUT 208V, 3 PHASE, 50/60/400 HZ MODEL MH-40-MP (NSN 4120-01-330-6543) |
| TM 9-4120-404-24P | 1 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR SPECIAL TOOLS LIST FOR AIR CONDITIONER, COMPACT, HORIZONTAL, MU POWER INPUT, 36,000 BTU/UR 208 VOLT, 3 PHASE, 50/60/400 HERTZ M MH-40-MP (NSN 4120-01-330-6543) |
| TM 9-4120-405-13&P | OPERATORS, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL (INCLUDI REPAIR PARTS AND SPECIAL TOOLS LIST) FOR AIR CONDITIONER: TRAILER MOUNTED, GENERATOR-SET-POWERED, 18,000 BTU/HR (NSN 4120-00-930-5700) | |
| TM 9-4120-407-14 | OPERATORS, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANC MANUAL FOR AIR CONDITIONER, 36,000 BTU, VERTICAL, MULTI-POWER INPUT, MODEL F36T-MPI (NSN 4120-01-359-0083) | |
| TM 9-4120-407-24P | 5 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, VERTICAL, COMPACT, 36,000 BTU/HR, 208 VOLT, THREE PHASE, 50/60 OR 400 HERTZ (NSN 4120-01-359-0083) MODEL F36T-MPI |
| TM 9-4120-408-14 | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR AIR CONDITIONER: SPLIT PACK, 30,000 BTUH 28 VDC (NSN 4120-01-377-7511) (EIC: FGJ) |
| TM 9-4120-408-24P | 2 | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER, SPLIT PACK, 30,000 BTU/HR, 28 VDC, (NSN 4120-01-377-7511) |
| TM 9-4120-411-14 | 1 | OPERATOR, UNIT, FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT MODEL FDECU-2 (NSN 4120-01-449-0459) AND MODEL FDECU-3 (NSN 4120-01-449-0459) |
| TM 9-4120-411-24P | FIELD DEPLOYABLE ENVIRONMENTAL CONTROL UNIT MODELS FDECU-2, FDECU-3, AND FDECU-4 (NSN 4120-01-449-0459) | |
| TM 9-4120-422-14&P | OPERATORS, UNIT, INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR CONDITIONER HORIZONTAL, COMPACT, 9,000 BTU/HR, 115 VOLT SINGLE PHASE 50/60 HERTZ PART NO. S8450-9KC-1HC (NSN 4120-01-456-6954) (EIC: N/A) | |
| TM 9-4120-423-14&P | AIR CONDITIONER 24,000 BTU, SPLIT PACK MODEL HSP24C30H (NSN 4120-01-459-5022) | |
| TM 9-4120-425-14&P | 1 | AIR CONDITIONER, HORIZONTAL, COMPACT, 36,000 BTU/HR, 208 VOLT, THREE PHASE, 50/60 HERTZ, PART NO. S9500-36KH-1 NSN 4120-01-467-2638 |
| TM 9-4120-428-14 | AIR CONDITIONER HORIZONTAL, COMPACT, 9000 BTU/HR, S08 VOLT, THREE PHASE, 400 HERTZ, MODEL NO. F9000H-4SPFI (NSN 4120-01-502-1319) | |
| TM 9-4120-428-24P | 1 | AIR CONDITIONER, HORIZONTAL, COMPACT, 9000 BTU/HR, 208 VOLT, THREE PHASE, 400 HERTZ F 9000H-4SPFI (NSN 4120-01-502-1319) (EIC: N/A) |
| TM 9-4120-429-14 | 1 | 24,000 BTUH, SPLIT PACK ENVIRONMENTAL CONTROL UNIT (ECU) NSN 4120-01-516-4715 (EIC: F24H4-2) |
| TM 9-4120-429-24P | REPAIR PARTS AND SPECIAL TOOLS LIST MANUAL FIELD AND SUSTAINMENT MAINTENANCE FOR 24,000 BTUH, SPLIT PACK ENVIRONMENTAL CONTROL UNIT (ECU) F24H4-2 (NSN 4120-01-516-4715) (EIC: NA) | |
| TM 9-4120-430-14 | AIR CONDITIONER, HORIZONTAL COMPAT, 18,000 BTU/HR 230 VOLT, 1 PHASE, 50/60 HERTZ, ENVIRONMENTAL SYSTEMS S9150-18KH-1 NSN 4120-01-523-4131 (EIC N/A) AND AIR CONDITIONER, HORIZONTAL COMPAT, 18,000 BTU/HR 208 VOLT, 3 PHASE, 50/60 HERTS, ENVIRONMENTAL SYSTEM S9160-18KH-3 NSN 4120-01-523-4472 (EIC N/A) | |
| TM 9-4120-430-24P | AIR CONDITIONER, HORIZONTAL COMPACT, 18,000 BTU/HR 230 VOLT, 1 PHASE, 50/60 HERTZ, ENVIRONMENTAL SYSTEMS S9150-18KH-1 (NSN 4120-01-523-4131) (EIC N/A) AIR CONDITIONER, HORIZONTAL COMPACT, 18,000 BTU/HR 208 VOLT, 3 PHASE, 50/60 HERTZ, ENVIRONMENTAL SYSTEMS S9160-18KH-3 (NSN 4120-01-523-4472) (EIC: N/A) | |
| TM 9-4120-431-14 | TECHNICAL MANUAL OPERATOR, FIELD, AND SUSTAINMENT MAINTENANCE MANUAL FOR 60K BTU/HR IMPROVED ENVIRONMENTAL CONTROL UNIT (IECU) MODEL 60K IECU NSN 4120-01543-0741 (EIC XXX) | |
| TM 9-4120-451-13&P | OPERATOR AND FIELD MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ENVIRONMENTAL CONTROL UNIT (ECU) NSN 4120-01-551-9191 | |
| TM 9-4220-262-13&P | DIVER PROPULSION DEVICE (DPD) (NSN 4220-01-523-7085) (P/N 4500-100) | |
| TM 9-4310-394-13 | OPERATORS, UNIT AND DIRECT SUPPORT MAINTENANCE MANUAL FOR AIR COMPRESSOR, PORTABLE, 5 CFM MODEL PD32T5, (NSN 4310-01-365-9013) | |
| TM 9-4310-394-23P | UNIT AND DIRECT SUPPORT REPAIR PARTS AND SPECIAL TOOLS LIST FOR AIR COMPRESSOR, PORTABLE, 5 CFM MODEL PD32T5 (NSN 4310-01-365-9013) | |
| TM 9-4310-396-13 | OPERATORS, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL FOR COMPRESSOR UNIT, RECIPROCATING, 15 CFM, 175 PSI, DIESEL ENGINE DRIVEN, TRAILER MOUNTED, MODEL CUE57-6DY-TM (NSN 4310-01-364-43 | |
| TM 9-4310-396-23P | UNIT, AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL T LIST FOR COMPRESSOR UNIT, RECIPROCATING, 15 CFM, 175 PSI, DIESE ENGINE DRIVEN, TRAILER MOUNTED, MODEL CUE57-6DY-TM (NSN 4310-01-364-4316) | |
| TM 9-4310-397-14 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL FOR COMPRESSOR, AIR, ROTARY, DIESEL ENGINE DRIVEN, SKID MOUNTED 125 CFM AT 100 PSI (NSN 4310-01-384-6951) MODEL 16MS125 | |
| TM 9-4310-397-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PAR SPECIAL TOOLS LIST FOR COMPRESSOR, AIR, ROTARY, DIESEL ENGINE D SKID MOUNTED 125 CFM AT 100 PSI (NSN 4310-01-384-6951) MODEL 16 | |
| TM 9-4520-251-14 | 2 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL FOR HEATER, DUCT TYPE, PORTABLE, TRAILER MOUNTED, 400,000 BTU/HR MODEL PH-400-G (NSN 4520-01-136-2139) |
| TM 9-4520-251-24P | 4 | ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE PARTS AND SPECIAL TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAI PARTS AND SPECIAL TOOLS) FOR HEATER, DUCT TYPE, PORTABLE, TRAIL MOUNTED, 400,000 BTU/HR HUNTER MODEL PH-400-G (NSN 4520-01-136- |
| TM 9-4520-257-12&P | 1 | HEATER, SPACE, RADIANT, LARGE (H-45) (TYPE I, SOLID FUEL) (NSN 4520-01-354-119 (TYPE II, LIQUID FUEL) (4520-01-329-3451) |
| TM 9-4520-258-14 | 2 | OPERATORS, UNIT, ARMY SPACE HEATER (ASH), ELECTRIC POWERED, MULTI-FUEL, 120,000 BTU, MODEL H120 (NSN 4520-01-367-2739) AND BTU, MODEL H-120-1 (NSN 4520-01-439-1682) |
| TM 9-4520-258-24P | UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST FOR ARMY SPACE HEATER (ASH), ELECTRICAL POWERED, MULTIFUEL, 120,000 BTU, MODEL H120 (NSN 4520-01-367-2739) | |
| TM 9-4520-260-13 | OPERATORS, UNIT, AND DIRECT SUPPORT MAINTENANCE MANUAL FOR HEATER, SPACE, DIESEL, WITH BLOWER 15,000 BTU/HR, 28VDC (MODEL UH48-E, TYPE IV) (NSN 4520-01-368-9594) | |
| TM 9-4520-260-23P | UNIT AND DIRECT SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TO LIST FOR HEATER, SPACE, DIESEL WITH BLOWER, 15,000 BTU/HR, 28VD (MODEL UH48-E, TYPE IV) (NSN 4520-01-368-9594) | |
| TM 9-4520-271-14 | 1 | IMPROVED ARMY SPACE HEATER (IASH), ELECTRIC POWERED, MULTI-FUEL, 140,000 BTU, MODEL H-140, NSN 4520-01-477-0568 (EIC: IMS) |
| TM 9-4520-271-24P | IMPROVED ARMY SPACE HEATER (IASH), ELECTRIC POWERED, MULTI-FUEL, 140,000 BTU, MODEL H-140 FOR NSN 4520-01-477-0568 (EIC: IMS) | |
| TM 9-4520-272-14&P | 1 | LARGE CAPACITY FIELD HEATER (LCFH), 350,000 BTU, INCLUDING DIESEL ENGINE (NSN 4520-01-500-1534) NSN 4520-01-500-1534 (EIC: N/A) |
| TM 9-4540-202-12&P | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP AND SPECIAL TOOLS LIST) FOR HEATER, IMMERSION, LIQUID FUEL FIRE 35,000 BTU OUTPUT FOR CORRUGATED CANS (MILITARY MODEL M67) (NSN 4540-00-469-6593) | |
| TM 9-4910-261-14P | OPERATORS, ORGANIZATIONAL, DS AND GS MAINTENANCE REPAIR PARTS SPECIAL TOOL LISTS (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AN SPECIAL TOOLS) FOR JACK, DOLLY-TYPE, HYDRAULIC: 10-TON CAPACITY (WALKER MFG., CO. MODEL 780) (FSN 4910-289-7233) | |
| TM 9-4910-262-14 | OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MA MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR JACK, DOLLY TYP HYDRAULIC: 16-INCH LIFT, TWO SPEED, 10-TON-CAPACITY (WEAVER DIV OF DURA CORPORATION), MODEL NO. WA-75-A (4910-289-7233) | |
| TM 9-4910-387-14-1 | 1 | OPERATORS, ORGANIZATIONAL, TESTER, FUEL INJECTOR PUMP: SINGLE END D 150 TO 3600 RPM (NSN 4910-01-037-9417) AND ADAPTER KITS, FUEL I (AMERICAN BOSCH APE-6BB) (4910-01-005-2850), (AMERICAN BOSCH PS PSB-6) (4910-01-005-2851), (AMERICAN BOSCH PSB-12BT) (OLD STYLE NEW STYLE) (4910-01-005-2852), (SIMMONDS SU) (4910-01-005-2853) (INTERNATIONAL HARVESTER 3200) (4910-01-006-3073), (AMERICAN BO PSJ-6A) (4910-01-006-3072), (CATERPILLAR) (4910-01-005-2854) (R MASTER) (4910-01-005-2855) AND (CUMMINS) (4910-00-763-7495) |
| TM 9-4910-387-14-2 | OPERATORS, ORGANIZATIONAL, TESTER, FUEL INJECTOR PUMP, SINGLE END D 150 TO 3600 RPM (NSN 4910-01-037-9417) AND ADAPTER KITS, FUEL I (AMERICAN BOSCH MODEL APE-6BB) (4910-01-005-2850), (AMERICAN BO MODEL PSB-6A AND PSB-6) (4910-01-005-2851), (AMERICAN BOSCH MOD PSB-12BT) (4910-01-005-2852) (SIMMONDS MODEL SU) (4910-01-005-2 (INTERNATIONAL HARVESTER MODEL 3200) (4910-01-006-3073), (AMERI BOSCH MODEL PSJ-6A) (4910-01-006-3072), (CATERPILLAR MODELS) (4910-01-005-2854), (ROOSA MASTER MODELS) (4910-01-005-2855) AN | |
| TM 9-4910-389-12 | 1 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP PARTS AND SPECIAL TOOLS LIST) FOR CLEANER AND TESTER, SPARK PLU BENCH MTD (CHAMPION SPARK PLUG CO., MODEL 800), (JAT INDUSTRIES MODEL JAT 5000), (THE OILJAK MFG. CO., MODEL B800M) (THE VP COMPANY, MODEL VP500) (FSN 4910-261-5868) |
| TM 9-4910-409-12 | 1 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP PARTS AND SPECIAL TOOLS) FOR TESTER, DIESEL FUEL INJECTOR NOZZL (BACHARACH INDUSTRIAL INSTRUMENT CO., MODEL YFL) (FSN 4910-255- W/CONNECTOR SET 44 (BACHARACH PART NO. 65-275) (4910-955-5517) CONNECTOR SET (ORD DWG B110200498) (4910-955-5516) |
| TM 9-4910-410-12 | 1 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP PARTS AND SPECIAL TOOLS LIST) FOR TESTER, ENGINE DISTRIBUTOR, BENCH-TYPE 6, 12 AND 24 VOLT DISTRIBUTORS, SINGLE PHASE, 60 HZ, 115 V (SUN ELECTRIC CORP., MODEL PDT-5) (FSN 4910-392-2939) |
| TM 9-4910-420-12 | 1 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP AND SPECIAL TOOLS LIST) FOR TESTER, ENGINE DISTRIBUTOR, BENCH-T 6, 12, AND 24 V DISTRIBUTORS, SINGLE PHASE, 60 HZ, 115 V (HEYER PRODUCTS CO., INC., MODEL 168) (FSN 4910-392-2939) |
| TM 9-4910-422-12 | 1 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REP PARTS AND SPECIAL TOOLS LIST) FOR KIT, SPARK PLUG CLEANING, AC, SPARK PLUG DIV. OF GENERAL MOTORS NO, 5612478, TYPE TK-2 (FSN 4910-786-9271) |
| TM 9-4910-428-10 | 1 | OPERATORS MANUAL GRINDING MACHINE, VALVE FACE (K. O. LEE MODEL K403 CM) (FSN 4910-540-4679) |
| TM 9-4910-430-10 | 1 | OPERATORS MANUAL FOR TESTER, CYLINDER COMPRESSION (BACHARACH I INSTRUMENT CO., MODEL YUF) (FSN 4910-808-4300) |
| TM 9-4910-432-10 | 1 | OPERATORS MANUAL: GRINDING KIT, VALVE SEAT: ELECTRIC, 35 DEGRE TYPE, CONCRETE DRIVE, 1/4 HP, AC/DC, SINGLE PHASE, 115 V, 14,00 RATED, NO LOAD SPEED (K. O. LEE CO., MODEL P300BB) (FSN 4910-06 AND (MODEL P300BB-M2) (4910-473-6437) |
| TM 9-4910-436-10 | 1 | OPERATORS MANUAL: GRINDING KIT, VALVE SEAT, ELECTRIC, CONCENTR DRIVE, 7500 RPM RATED NO LOAD SPEED, 115 V, AC/DC, SHIELDED TO RADIO INTERFERENCE (ALBERTSON AND CO., MODEL 1712-S) (FSN 4910- |
| TM 9-4910-437-10 | 1 | OPERATORS MANUAL: BORING MACHINE, ENGINE CYLINDER (ROTTLER BORING BAR CO., MODEL DA-1H) (FSN 4910-473-6361) |
| TM 9-4910-441-10 | 1 | OPERATORS MANUAL FOR BORING MACHINE, ENGINE CYLINDER: (ROTTLER BORING BAR CO., MODEL DA-4) (4910-223-9734) |
| TM 9-4910-445-10 | 1 | OPERATORS MANUAL: LATHE, BRAKE DRUM, FLOOR MTD, 60-INCH RATED 9 TO 25-INCH DRUM DIAMETER, 10-INCH MAXIMUM CUTTING DEPTH, STAT CUTTING TOOL TYPE W/GRINDING PROVISIONS, 1 HP DRIVE MOTOR, AC, 60 HZ, SINGLE PHASE, 1/2 HP GRINDING MOTOR, AC; 115 V, 60 HZ SI PHASE (AMCO TOOLS INC., MODEL 7700-7) (FSN 4910-516-6192) |
| TM 9-4910-446-10 | 1 | OPERATORS MANUAL FOR LATHE, BRAKE DRUM, FLOOR MTD, 60-INCH RAT SWING, 25-INCH MAXIMUM DRUM DIAMETER W/GRINDING PROVISIONS, 1 H MOTOR, 1/2 HP GRINDING MOTOR, 115 V, 60 CYCLE, SINGLE PHASE (ST MACHINE AND TOOL CO., MODEL 1960) (FSN 4910-516-6192) |
| TM 9-4910-448-10 | 1 | OPERATORS MANUAL INCLUDING BASIC ISSUE ITEMS LIST: TEST SET, G AND VOLTAGE REGULATOR, AUTOMOTIVE (ALLEN ELECTRIC AND EQUIPMENT MODEL 30-82) (FSN 4910-270-3780) |
| TM 9-4910-452-10 | 1 | OPERATORS MANUAL FOR LATHE, BRAKE DRUM, FLOOR MTD, 60-INCH RAT 9 TO 25-INCH DRUM DIAMETER, 10-INCH MAXIMUM CUTTING DEPTH, STAT CUTTING TOOL TYPE, 1/2 HP, AC, 110/220 V, 60 CYCLE, SINGLE PHAS (BEAR MFG CO., MODEL 1410) (FSN 4910-516-6192) |
| TM 9-4910-453-10 | 1 | OPERATORS MANUAL FOR GRINDING KIT, VALVE SEAT, ELECTRIC, 35 DEGREE ANGLE CONCENTRIC DRIVE DRIVER, AC/DC, 115 V, 7,500 RP RATED NO LOAD SPEED (ALBERTSON AND COMPANY MODEL 1712-M) (FSN 4910-060-9983) |
| TM 9-4910-454-10 | 1 | OPERATORS MANUAL KIT, SPARK PLUG CLEANING (ALLEN ELECTRIC AND EQUIPMENT CO., MODEL 30-99) (FSN 4910-786-9271) |
| TM 9-4910-456-14 | 2 | OPERATOR, ORGANIZATIONAL, DIRECT SUPPORT AND GENERAL SUPPORT MA MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS) FOR TEST SET, GENER VOLTAGE REGULATOR, AUTOMOTIVE: 12 AND 24-VOLT SYSTEMS (ALLEN EL AND EQUIPMENT CO., MODEL 30-92) (FSN 4910-092-9136) |
| TM 9-4910-458-12 | 1 | OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOL LISTS) FOR TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR, AND STARTER, FLOOR MTG 10 TO 50 V, 500 AMP, DC AND 25 TO 50 V, 100 TO 400 AMP, AC, TES RANGES W/8000 TO 11,000 RPM, 22 1/2 HP, 220/440 V, AC, TESTING 3 PHASE, DUAL HEAD, VARI-DRIVE ASSEMBLY (UNITED MANUFACTURING C MODEL AGARTS, TYPE II, PART NO. 7336-1; MODEL AGARTS, TYPE II, NO. 7336-2 AND MODEL AGARTS, TYPE II, PART NO. 7336-3) (FSN 4910-767-0218) AND TYPE II, PA |
| TM 9-4910-458-35P | DIRECT SUPPORT, GENERAL SUPPORT, AND DEPOT MAINTENANCE REPAIR P SPECIAL TOOLS LIST: TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATO STARTER (UNITED MANUFACTURING CO., MODEL AGART, TYPE II) PART N 7336 (FSN 4910-316-5252) AND PART NOS. 7336-1, 7336-2, AND 7336 (4910-767-0218) | |
| TM 9-4910-459-10 | 1 | OPERATORS MANUAL FOR BORING MACHINE, ENGINE CYLINDER, PORTABLE TO 7 1/2 BORE DIAMETER, 18-INCH DEPTH OF BORE; 110 V, 60 HZ, SI PHASE (CEDAR RAPIDS ENGINEERING CO., MODEL FL) (FSN 4910-223-97 |
| TM 9-4910-463-10 | 1 | OPERATORS MANUAL: TESTER, ENGINE DISTRIBUTOR: BENCH TYPE, 115-V, 60-CYCLE, SINGLE PHASE FOR TESTING 6, 12, AND 24-V DISTRIBUTORS (ALLEN ELECTRIC & EQUIPMENT COMPANY MODEL 30-89) (NSN 4910-00-392-2939) |
| TM 9-4910-472-10 | 1 | OPERATORS MANUAL FOR TEST SET, GENERATOR AND VOLTAGE REGULATOR AUTOMOTIVE, 6, 12 AND 24 VOLT SYSTEMS (SUN ELECTRIC CORP., MODE VAT-25) (FSN 4910-270-3780) |
| TM 9-4910-473-10 | 1 | OPERATORS MANUAL FOR GRINDING MACHINE, VALVE FACE (CEDAR RAPID CO., KWIK-WAY MODEL VL) (FSN 4910-252-1372) |
| TM 9-4910-477-10 | 1 | OPERATORS MANUAL FOR TESTER, INTERNAL COMBUSTION ENGINE, VACUU AND PUMP PRESSURE, 0 TO 8 LB PRESSURE AND 0 TO 27-INCH VACUUM (CENTURY TOOL CO., MODEL 27-12) (FSN 4910-255-8673) |
| TM 9-4910-484-10 | 1 | OPERATORS MANUAL GRINDING MACHINE, VALVE FACE, BENCH MOUNTING, 9/32 INCH TO 11/16 INCH CHUCK, 0 TO 45 DEGREE VALVE FACE ANGLE ADJUSTMENT, 115-VOLT, AC/DC, 60-CYCLE, SINGLE (CEDAR RAPIDS MODEL KWIK-WAY KK) (NSN 4910-540-4679) |
| TM 9-4910-485-12 | 2 | OPERATOR AND ORGANIZATIONAL MAINTENANCE MANUAL (INCLUDING REPAI AND SPECIAL TOOL LISTS): TEST STAND, AUTOMOTIVE GENERATOR, ALTE AND STARTER, FLOOR MOUNTED, 10 TO 50 V, 500 AMP, DC AND 25 TO 5 TO 400 AMP, AC, TESTING RANGES W/8000 TO 12,000 RPM, 22 1/2 HP, V, 60 CYCLE, 3 PHASE, DUAL HEAD VARI-DRIVE ASSEMBLY (SUN ELECTR MODELS AGT-9 AND AGT-9A) (FSN 4910-767-0218) |
| TM 9-4910-485-34P | DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND TOOLS LIST (INCLUDING DEPOT MAINTENANCE REPAIR PARTS AND SPECIA FOR TEST STAND, AUTOMOTIVE GENERATOR, ALTERNATOR AND STARTER, F MOUNTED, 10 TO 50 V, 500 AMP, DC (SUN ELECTRIC CORP., MODEL AGT AGT-9A) (FSN 4910-767-0218) | |
| TM 9-4910-487-10 | 1 | OPERATORS MANUAL: GRINDING MACHINE, CYLINDER HEAD (CEDAR RAPIDS ENGINEERING MODEL 860) (FSN 4910-889-2051) |
| TM 9-4910-488-10 | 1 | OPERATORS MANUAL FOR TEST SET, IGNITION COIL CAPACITOR RESISTOR SUN ELECTRIC CORP. MODEL CCT-20 (FSN 4910-300-1305) |
| TM 9-4910-489-10 | 1 | OPERATORS MANUAL FOR TEST SET GENERATOR AND VOLTAGE REGULATOR, AUTOMOTIVE, 12- AND 24-VOLT SYSTEMS (SUN ELECTRIC MODEL LVR-3A) (FSN 4910-092-9136) |
| TM 9-4910-491-15P | OPERATORS, ORGANIZATIONAL, DS, GS, AND DEPOT MAINTENANCE REPAIR PARTS AND SPECIAL TOOL LISTS FOR SPREADER, TIRE, AIR OPERATED, PEDESTAL TYPE, WITH TIRE HOIST, 12 TO 28 INCH BEAD DIAMETER RANGE, 3.30 TO 14.00 INCH MAXIMUM CROSS SECTION (BRANICK MODEL FS/EF) (FSN 4910-190-5244) | |
| TM 9-4910-496-10 | OPERATORS MANUAL: TOWBAR, MOTOR VEHICLE (FSN 4910-735-6056) | |
| TM 9-4910-509-10 | OPERATORS MANUAL FOR LOW VOLTAGE CIRCUIT TESTERS | |
| TM 9-4910-571-12&P | 2 | OPERATORS AND ORGANIZATIONAL MAINTENANCE MANUAL INCLUDING REPA AND SPECIAL TOOLS LIST FOR SIMPLIFIED TEST EQUIPMENT FOR INTERN COMBUSTION ENGINES (NSN 4910-01-124-2554) (THIS ITEM IS INCLUDED ON EM 0030,EM 0034, EM 0050 & EM 0097) |
| TM 9-4910-571-34&P | 3 | INCLUDING PARTS AND SPECIAL TOOLS LIST SIMPLIFIED TEST EQUIPMENT FOR INTE COMBUSTION ENGINES REPROGRAMMABLE (STE/ICE-R) (NSN 4910-01-222 |
| TM 9-4910-573-14&P | 1 | OPERATORS, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENAN MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR GROUND HOP SUPPORT SET (GHSS) (NSN 4910-01-231-0343) |
| TM 9-4910-579-14&P | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR BORING MACHI ENGINE CYLINDER, MODEL FN (KWIK-WAY MFG. CO.) (NSN 4910-00-473- | |
| TM 9-4910-582-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TESTER, CYLI MODEL 2093A (STEWART-THOMAS INDUSTRIES, INC.) (NSN 4910-00-250- | |
| TM 9-4910-585-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR LIGHT, IGNIT TIMING (MAGNETO) (AUTO TEST MODEL 235) (NSN 4910-00-255-1449) | |
| TM 9-4910-586-14&P | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST) FOR STAND, TRA ENGINE (NSN 4910-00-338-6673) | |
| TM 9-4910-587-14&P | OPERATORS, ORGANIZATIONAL, (INCLUDING REPAIR PARTS LIST) FOR HOIST UNIT AUTOMOTIVE MAINTENANCE (NSN 4910-00-448-0254) | |
| TM 9-4910-590-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR GRINDING KIT SEAT, ELECTRIC, NO 6335 (BLACK AND DECKER MFG. CO.) (NSN 4910-00-473-6437) | |
| TM 9-4910-593-12&P | OPERATORS AND UNIT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST) FOR TOWBAR, MOTOR VEHICLE, WHEELED (NSN 4910-01-365-9304) | |
| TM 9-4910-595-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR BEAD BREAKER PNEUMATIC TIRE (STANDARD WHEEL AND RIM CO.) (NSN 4910-00-773-93 | |
| TM 9-4910-600-14&P | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS LIST) FOR GRINDING K SEAT (K.O. LEE CO., INC) (NSN 4910-00-060-9983) | |
| TM 9-4910-604-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TEST SET, DI INJECTOR (BACHARACH INSTRUMENT COMPANY) (NSN 4910-00-317-8265) | |
| TM 9-4910-607-14&P | OPERATORS, ORGANIZATIONAL, (INCLUDING REPAIR PARTS LIST) FOR ADAPTER SE ENGINE, ELECTRIC TEST (NSN 4910-00-348-7600) | |
| TM 9-4910-609-14&P | OPERATORS, ORGANIZATIONAL , INCLUDING REPAIR PARTS LIST FOR MAINTENANCE FIXTURE (HYDRAULICS INTERNATIONAL INC., MODEL RM-77) (NSN 4910-00-357-1874) | |
| TM 9-4910-610-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TESTER, COMP (KIENE DIESEL ACCESSORIES, INC) (NSN 4910-00-808-4300) | |
| TM 9-4910-611-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TEST SET, IN (BACHARACH INSTRUMENT CO., MODEL YHQ) (NSN 4910-00-355-6248) | |
| TM 9-4910-617-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR TABLE, WORK MFG. INC., MODEL 7225) (NSN 4910-00-205-3046) | |
| TM 9-4910-622-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR DISTRIBUTOR ENGINE (SUN ELECTRIC CORP., MODEL PDT-5D) (NSN 4910-00-392-2939 | |
| TM 9-4910-623-14&P | 1 | OPERATORS, ORGANIZATIONAL, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS LIST FOR TESTER, DIES INJECTOR NOZZLE, MODEL DT-1300/7008 (KIENE DIESEL ACCESSORIES I (NSN 4910-00-255-8641) |
| TM 9-4910-626-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR LIFT, TRANSM AND DIFFERENTIAL (AUTO SPECIALTIES MFG. CO., MODEL 24-51404-4) (NSN 4910-00-585-3622) | |
| TM 9-4910-630-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR RELINER, BRA CLUTCH (METAL-NAX SALES DIVISION) (NSN 4910-00-173-5310) | |
| TM 9-4910-631-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR CLEANER AND SPARK PLUG (BANNER METALS MODEL 82) (NSN 4910-00-261-5868) | |
| TM 9-4910-638-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR BORING MACHI ENGINE CYLINDER (KWIK-WAY MFG. CO., MODEL FL) (NSN 4910-00-223- | |
| TM 9-4910-641-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LISTS FOR GRINDING MA VALVE FACE, MODEL K403C AND K500C (K.O. LEE CO.) (NSN 4910-00-5 | |
| TM 9-4910-644-14&P | OPERATORS, ORGANIZATIONAL, INCLUDING REPAIR PARTS LIST FOR LIGHT, IGNIT TIMING PN 7710 (HYDRAULIC TECHNOLOGY INC.) (NSN 4910-00-255-144 |